SB1B by Jason Industrial | Sandblast Hose Coupling | Threaded Pot End | 1-1/4" Female NPT | Brass Filter-All-Series_LT Used With: PT230 and TP160

Used With: PT230 and TP160 nylon

Certification only applies to those assemblies where both mating parts socket/female and plug/male are Danfoss FD85 Series thread to connect couplings

) A B OD ID B2WCL-R50P 1/2" 1

Note: Ground Plug Drains and Shut-Offs use a universal lubricant satisfactory for use with most common fluids

7800 B2S-R250U 2-1/2" 5

SB1B by Jason Industrial | Sandblast Hose Coupling | Threaded Pot End | 1-1/4" Female NPT | Brass Filter-All-Series_LT Used With: PT230 and TP160Overview: There are three active sandblast system couplings; HOSE ENDS which are used to make hose to hose connections or hose to blast pot connections, NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle, and the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot. All three are available in aluminum or brass. Hose ends are also available in Iron. THREADED POT ENDS do not fit the hose,