MHV200 by Banjo | Manifold Flange Connections | 2" Manifold Inductor with 1-1/2" Port | Volume Draw: 37 GPM | Opening Size: 5/16" | Pressure at Pump: 300 PSI | Polypropylene 1871-S Series Quick Connect Air Brake Eaton Male Swivel Run Tee 1/4" female NPT inlet

1/4" female NPT inlet

This will insure a representative sample of all components in the fluid system for their present condition

up to E100 and B100 biofuels TTF4AL-4MT 4" 4" 2-1/2" Gasoline and diesel

Mold Aluminum

Features: Resistant to steam

MHV200 by Banjo | Manifold Flange Connections | 2" Manifold Inductor with 1-1/2" Port | Volume Draw: 37 GPM | Opening Size: 5/16" | Pressure at Pump: 300 PSI | Polypropylene 1871-S Series Quick Connect Air Brake Eaton Male Swivel Run Tee 1/4" female NPT inletApplications: Fluids Features: Threaded or manifold ends Glass reinforced polypropylene Note: Each venturi comes in two pieces Note: The inductor is designed for use with a volume pump. Typical volumes and pressures used to operate the venturi would be in the 80 to 240 US GPM range at pressures from 26 to 52 PSI Note: US GPM. Tests done with water at ambient temperature. Pump used for test was a 2" Banjo (5 vane impeller) driven by a 5. 5 hp Honda gas