B10 by Dixon Valve | Boss® Clamp | 2-Bolt Type | 2-Gripping Fingers | 3/4" Hose ID | Hose OD: from 1-32/64" to 1-44/64" | Global Investment Cast Carbon Steel LegacyProductTypeReplacement_Dixon Boss Washer Seal Stems (in) 5/8" 3/4" 7/8" A

(in) 5/8" 3/4" 7/8" A B E Crank E Power F Crank F Power X E-2016-17-18 (two) 100' lengths (two) 75' lengths (two) 50' lengths 50 lbs

38" FF2031T1612S 1

Part Number Hose Shank x Female NPT WF3 - 3/8" WF6 - 1/2" WF26-1 - 1/2" x 3/4" WF26 RWF26 3/4" WF36 RWF36 1" WF51 RWF51 1-1/4" WF61 RWF61 1-1/2" WF81* RWF81* 2" WF96 - 2-1/2" WF111 - 3"

69" 900605-14S - 0

FT1341 Port and Identification Thread Measuring Kit Measuring tube and pipe fitting threads can be a most difficult task if not completely understood

B10 by Dixon Valve | Boss® Clamp | 2-Bolt Type | 2-Gripping Fingers | 3/4" Hose ID | Hose OD: from 1-32/64" to 1-44/64" | Global Investment Cast Carbon Steel LegacyProductTypeReplacement_Dixon Boss Washer Seal Stems (in) 5/8" 3/4" 7/8" AFeatures: 2 Bolt type clamp. 2 Gripping fingers. 2 Clamp sections. Use: The correct size Boss Clamp must be used. Bolts in Boss Clamps are designed to bend as they are tightened. This allows the clamp to conform to the hose outside diameter. Always tighten bolts to their specified torque value. Periodic re tightening of bolts is required due to "cold flow" phenomenon present in all rubber hoses. Boss Clamps are for single use only! Once removed they